Remove/Install Front Panoramic Roof Roller Sun Blind - AR77.21-P-0200LF
Model 222
with code 398 (Panoramic roof with MAGIC SKY CONTROL)
Model 222
with code 413 (Automatic panoramic sliding sunroof)
Shown on right side of roller sun blind (1)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Remove/install | |||
| 1 | Remove front glass panel from panoramic roof | AR77.21-P-0500NKA | |
| 2 | Remove wind deflector cover (2) | ||
| 3 | Remove roller sun blind cover (3) | ||
| 4 | Unscrew bolt (4) from left and right roller sun blind drive plate (5) | ||
| 5 | Push left and right guide rail (6) with screwdriver (7) approx. 5 mm toward front | ||
| 6 | Unclip catch hook (8) on both sides of roller sun blind (1) with screwdriver (7) | ||
| 7 | Unclip shackle (9) on both sides of roller sun blind (1) with screwdriver (7) (arrow) and remove roller sun blind (1) upward at top of panoramic roof frame | ||
| 8 | Install in the reverse order |