Replace Mounting Brackets Of Connecting Struts - AP62.30-P-0060A
Model 222 with code Z07 (B7 armoring on special protection version)
MODIFICATION NOTES
| 14.06.2016 | Schraube Versteifung an Stirnwand/Langstrager/Versteifung Mitte | BA62.25-P-1001-01B |
Shown on engine 277 in model 222.976
| Remove | |||
| 1 | Remove nuts (2) of mounting brackets (1) | ||
| 2 | Remove screws/bolts (3) of mounting brackets (1) | ||
| 3 | Remove mounting brackets (1) | ||
| Install | |||
| 4 | Install new mounting brackets (1) | ||
| 5 | Tighten screws/bolts (3) of mounting brackets | *BA62.25-P-1001-01B | |
| 6 | Tighten nuts (2) of mounting brackets (1) | *BA32.25-P-1001-04O |
SUSPENSION STRUTS
| Number | Designation | Model 222 with code Z07 (B7 armoring on special protection version) | |
|---|---|---|---|
| BA32.25-P-1001-04O | Nut, suspension strut at front to body | Nm | 50 |
FIREWALL
| Number | Designation | Model 222 | ||
|---|---|---|---|---|
| BA62.25-P-1001-01B | Bolt, reinforcement to firewall/longitudinal member/reinforcement, center | M6 | Nm | 9 |
| M8 | Nm | 30 | ||