(Pneumatic Brake Booster Test Specifications - BE43.10-P-1000-01F)
Model 172, 204, 207, 212, 217, 218, 222, 223, 231, 232
CHECK VALUES FOR PNEUMATIC BRAKE BOOSTER
| Number | Designation | Model 172 | Model 204 | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01F | Brake booster Ø | - | mm | 178/233 | 203/203 | ||
| - | Inches | 7/8 | 8/8 | ||||
| BE43.10-P-1002-01F | Boost factor | ≈ 6, 5 | ≈ 5, 6 | ||||
| BE43.10-P-1003-01F | Brake line pressure | Intake manifold vacuum 0.75 to 0.8 bar | Force on brake pedal | 50 N | bar | 17, 5...24, 6 | 16, 7...23, 7 |
| 100 N | bar | 34, 6...44, 6 | 33, 3...42, 9 | ||||
| 150 N | bar | 51, 0...63, 9 | 49, 8...61, 4 | ||||
| 200 N | bar | 68, 6...74, 6 | 66, 3...79, 8 | ||||
| 250 N | bar | 77, 6...82, 0 | 82, 9...98, 3 | ||||
| BE43.10-P-1004-01F | Master brake cylinder Ø | mm | 26, 99 | 25, 4 | |||
| BE43.10-P-1005-01F | Line pressure without vacuum | Force on brake pedal | 50 N | bar | - | - | |
| 100 N | bar | - | - | ||||
| 150 N | bar | - | - | ||||
| 200 N | bar | - | - | ||||
| 250 N | bar | - | - | ||||
| 500 N | bar | - | - | ||||
| BE43.10-P-1006-01F | Check valve/pressure in vacuum system of brake booster | Test pressure (vacuum) | bar | - | - | ||
| Test period | s | - | - | ||||
| Permissible pressure loss | bar | - | - | ||||
CHECK VALUES FOR PNEUMATIC BRAKE BOOSTER
| Number | Designation | Model 207 | Model 212 | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01F | Brake booster Ø | - | mm | 203/203 | 203/229 | ||
| - | Inches | 8/8 | 8/9 | ||||
| BE43.10-P-1002-01F | Boost factor | ≈ 5, 6 | ≈ 7 | ||||
| BE43.10-P-1003-01F | Brake line pressure | Intake manifold vacuum 0.75 to 0.8 bar | Force on brake pedal | 50 N | bar | 16, 7...23, 7 | 17, 7...24, 7 |
| 100 N | bar | 33, 3...42, 9 | - | ||||
| 150 N | bar | 49, 8...61, 4 | 62...78 | ||||
| 200 N | bar | 66, 3...79, 8 | 83...102 | ||||
| 250 N | bar | 82, 9...98, 3 | 105...122 | ||||
| BE43.10-P-1004-01F | Master brake cylinder Ø | mm | 25, 4 | 26, 99 | |||
| BE43.10-P-1005-01F | Line pressure without vacuum | Force on brake pedal | 50 N | bar | - | - | |
| 100 N | bar | - | - | ||||
| 150 N | bar | - | - | ||||
| 200 N | bar | - | - | ||||
| 250 N | bar | - | - | ||||
| 500 N | bar | - | - | ||||
| BE43.10-P-1006-01F | Check valve/pressure in vacuum system of brake booster | Test pressure (vacuum) | bar | - | - | ||
| Test period | s | - | - | ||||
| Permissible pressure loss | bar | - | |||||
CHECK VALUES FOR PNEUMATIC BRAKE BOOSTER
| Number | Designation | Model 217 | Model 218 | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01F | Brake booster Ø | - | mm | 220/247, 5 | 203/229 | ||
| - | Inches | 8/9 | 8/9 | ||||
| BE43.10-P-1002-01F | Boost factor | ≈ 7 | ≈ 7 | ||||
| BE43.10-P-1003-01F | Brake line pressure | Intake manifold vacuum 0.75 to 0.8 bar | Force on brake pedal | 50 N | bar | 17, 7...24, 7 | |
| 100 N | bar | - | - | ||||
| 150 N | bar | 62...78 | 62...78 | ||||
| 200 N | bar | 83...102 | 83...102 | ||||
| 250 N | bar | 105...122 | 105...122 | ||||
| BE43.10-P-1004-01F | Master brake cylinder Ø | mm | 26, 99 | 26, 99 | |||
| BE43.10-P-1005-01F | Line pressure without vacuum | Force on brake pedal | 50 N | bar | - | - | |
| 100 N | bar | - | - | ||||
| 150 N | bar | - | - | ||||
| 200 N | bar | - | - | ||||
| 250 N | bar | - | - | ||||
| 500 N | bar | - | - | ||||
| BE43.10-P-1006-01F | Check valve/pressure in vacuum system of brake booster | Test pressure (vacuum) | bar | - | - | ||
| Test period | s | - | - | ||||
| Permissible pressure loss | bar | - | |||||
CHECK VALUES FOR PNEUMATIC BRAKE BOOSTER
| Number | Designation | Model 222 except code Z07 (B7 armoring on special protection version) | Model 222 with code Z07 (B7 armoring on special protection version) | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01F | Brake booster Ø | - | mm | 220/247, 5 | 251/265 | ||
| - | Inches | 8/9 | 9, 5 | ||||
| BE43.10-P-1002-01F | Boost factor | ≈ 7 | ≈ 9, 1 | ||||
| BE43.10-P-1003-01F | Brake line pressure | Intake manifold vacuum 0.75 to 0.8 bar | Force on brake pedal | 50 N | bar | 22, 30 | 22, 50 |
| 100 N | bar | 43, 70 | 41, 30 | ||||
| 150 N | bar | 64, 20 | 60, 40 | ||||
| 200 N | bar | 84, 90 | 79, 60 | ||||
| 250 N | bar | 105, 90 | 87, 40 | ||||
| BE43.10-P-1004-01F | Master brake cylinder Ø | mm | 26, 99 | 31, 75 | |||
| BE43.10-P-1005-01F | Line pressure without vacuum | Force on brake pedal | 50 N | bar | - | - | |
| 100 N | bar | - | - | ||||
| 150 N | bar | - | - | ||||
| 200 N | bar | - | - | ||||
| 250 N | bar | - | - | ||||
| 500 N | bar | - | - | ||||
| BE43.10-P-1006-01F | Check valve/pressure in vacuum system of brake booster | Test pressure (vacuum) | bar | - | - | ||
| Test period | s | - | - | ||||
| Permissible pressure loss | bar | - | - | ||||
CHECK VALUES FOR PNEUMATIC BRAKE BOOSTER
| Number | Designation | Model 223 except code Z07 (B7 armoring on special protection version) | Model 223 with code Z07 (B7 armoring on special protection version) | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01F | Brake booster Ø | - | mm | 220/247, 5 | 251/265 | ||
| - | Inches | 8/9 | 9, 5 | ||||
| BE43.10-P-1002-01F | Boost factor | ≈ 7 | ≈ 9, 1 | ||||
| BE43.10-P-1003-01F | Brake line pressure | Intake manifold vacuum 0.75 to 0.8 bar | Force on brake pedal | 50 N | bar | 22, 30 | 22, 50 |
| 100 N | bar | 43, 70 | 41, 30 | ||||
| 150 N | bar | 64, 20 | 60, 40 | ||||
| 200 N | bar | 84, 90 | 79, 60 | ||||
| 250 N | bar | 105, 90 | 87, 40 | ||||
| BE43.10-P-1004-01F | Master brake cylinder Ø | mm | 26, 99 | 31, 75 | |||
| BE43.10-P-1005-01F | Line pressure without vacuum | Force on brake pedal | 50 N | bar | 0 | 0 | |
| 100 N | bar | 1 | 0 | ||||
| 150 N | bar | 4 | 3 | ||||
| 200 N | bar | 8 | 5 | ||||
| 250 N | bar | 11 | 7 | ||||
| 500 N | bar | 26 | 19 | ||||
| BE43.10-P-1006-01F | Check valve/pressure in vacuum system of brake booster | Test pressure (vacuum) | bar | 0, 75...0, 8 | 0, 75...0, 8 | ||
| Test period | s | 30 | 30 | ||||
| Permissible pressure loss | bar | ≤ 0, 2 | ≤ 0, 2 | ||||
CHECK VALUES FOR PNEUMATIC BRAKE BOOSTER
| Number | Designation | Model 231 | Model 232 | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01F | Brake booster Ø | - | mm | 203/229 | 232 | ||
| - | Inches | 8/9 | 8/9 | ||||
| BE43.10-P-1002-01F | Boost factor | 5, 6 | 7, 0 | ||||
| BE43.10-P-1003-01F | Brake line pressure | Intake manifold vacuum 0.75 to 0.8 bar | Force on brake pedal | 50 N | bar | 17, 5..25, 5 | 14, 4..22, 2 |
| 100 N | bar | 34...45 | 30, 3..39, 7 | ||||
| 150 N | bar | 48...62 | 46, 1..57, 2 | ||||
| 200 N | bar | 64...80 | 61, 9..74, 7 | ||||
| 250 N | bar | 78...95 | 77, 7..92, 2 | ||||
| BE43.10-P-1004-01F | Master brake cylinder Ø | mm | 26, 99 | 28, 57 | |||
| BE43.10-P-1005-01F | Line pressure without vacuum | Force on brake pedal | 50 N | bar | - | 0 | |
| 100 N | bar | - | 0, 2 | ||||
| 150 N | bar | - | 2, 6 | ||||
| 200 N | bar | - | 5, 1 | ||||
| 250 N | bar | - | 7, 6 | ||||
| 500 N | bar | - | 19, 8 | ||||
| BE43.10-P-1006-01F | Check valve/pressure in vacuum system of brake booster | Test pressure (vacuum) | bar | - | - | ||
| Test period | s | - | - | ||||
| Permissible pressure loss | bar | - | - | ||||