Tightening Pattern For Turbocharger - AR09.40-P-6020-10NMB
Engine 157, 278
MODIFICATION NOTES
| 14.09.2017 | Bolt/nut, exhaust line to turbocharger | Engine 157 | BA14.10-P-1003-01E |
| 14.09.2017 | Bolt/nut, exhaust line to turbocharger | Engine 278 | BA14.10-P-1003-01E |
EXHAUST MANIFOLD
| Number | Designation | Engine 157 | Engine 278 | ||
|---|---|---|---|---|---|
| BA14.10-P-1003-01E | Bolt/nut, exhaust line to turbocharger | Stage 1 | Nm | 15 | 15 |
| Stage 2 | Nm | 25 | 25 | ||
EXHAUST MANIFOLD
| Number | Designation | Engine 157 | Engine 278 | |
|---|---|---|---|---|
| BA14.10-P-1004-01E | Bolt, bracket to exhaust line | Nm | 25 | 25 |
EXHAUST MANIFOLD
| Number | Designation | Engine 157 | Engine 278 | |
|---|---|---|---|---|
| BA14.10-P-1005-01E | Nut, exhaust line holder to cylinder head | Nm | 20 | 20 |
- Tighten screw (1) and nut (2) in shown sequence with initial torque
.
- Tighten nuts (3, 4) in shown sequence with final tightening torque
- Tighten nut (2) with final tightening torque
- Tighten screw (1) with final tightening torque
- Tighten nut (5) with final tightening torque
- Tighten screw (6) with final tightening torque