Check Main Circuit Coolant Level - AP20.30-P-2050GB
Engine 157, 276, 278, 642, 651 in model 166
| Remove | |||
| 1 | Switch off ignition | ||
| 2 | Open engine hood | ||
| AR88.40-P-1000GQ | |||
| Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the overpressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. |
AS20.00-Z-0001-01A | |
| 3 | Unscrew cap (1) for coolant expansion reservoir (2) | ||
| Check | |||
| 4 | Check coolant level | ||
| Notice | Notes on coolant | AH20.00-P-2080-01KOA | |
When the coolant is warm, about 1 cm above the marking (arrow). If coolant level is too low: ↓ Check coolant for leaktightness and check coolant for antifreeze content subject to separate repair order. |
|||
| Install | |||
| 5 | Seal coolant expansion reservoir (2) with cap (1) | ||
| 6 | Close engine hood | ||
| AR88.40-P-1000GQ |