Correct Rear Wheel Camber - AR40.20-P-0262GQ

MODEL 166, 292 

MODIFICATION NOTES

2.7.15	Camber at vehicle level	Model 166.0 except code 489/491/Z04/Z05	BE40.20-P-1001-09AI
2.7.15	Camber at vehicle level	Model 166.0 with code 489, model 166.8	BE40.20-P-1001-09AI
2.7.15	Camber at vehicle level	Model 166.0 with code 491	BE40.20-P-1001-09AI
2.7.15	Camber at vehicle level	Model 166.0 with code Z04/Z05	BE40.20-P-1001-09AI
2.7.15	Camber at vehicle level	Model 166 AMG	BE40.20-P-1001-09AI

	Adjust camber
1	Loosen nut of cam bolt (2)	If the cam bolt (2) exceeds a length of 65 mm: ↓ Replace cam bolt (2).
2	Adjust camber with cam bolt (2)	Any larger deviations in camber on the rear axle may be down to different reasons, e.g. too large a difference in the vehicle level between the left and right side of vehicle, deformation of camber strut (1) or deformation of rear axle carrier, e.g. through accident damage.
		Camber at vehicle level	*BE40.20-P-1001-09AI
		Permissible difference in rear axle camber between right and left side of vehicle	*BE40.20-P-1002-09AI
		Deformation of camber strut (1) ↓ Replace camber strut (1)	AR35.20-P-0110GZ
		If difference in vehicle level is too large between left and right side of vehicle ↓ Balance vehicle level	AR40.20-P-0301GQ
		Deformation of body, e.g. through accident damage ↓ Check for unacceptable deformation on body	AR40.30-P-0400GZ
3	Tighten nut of cam bolt (2)	Self-locking nut, camber strut to rear axle carrier	*BA35.20-P-1001-02F

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation			Model 166.0 except code 489/491/Z04/Z05	Model 166.0 with code 489, model 166.8
BE40.20-P-1001-09AI	Camber at vehicle level	-0.77°	∠°	-	-2° 8' (± 30')
		-0.64°	∠°	-	-
		2.39°	∠°	-	-
		3.36°	∠°	-1° 5' (± 30')	-

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation			Model 166.0 with code 491	Model 166.0 with code Z04/Z05
BE40.20-P-1001-09AI	Camber at vehicle level	-0.77°	∠°	-	-2° 8' (± 30')
		-0.64°	∠°	-	-
		2.39°	∠°	-1° 19' (± 30'	-
		3.36°	∠°	-	-

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation			Model 166 AMG	Model 292 with code 489
BE40.20-P-1001-09AI	Camber at vehicle level	-0.77°	∠°	-2° 8' (± 30')	-
		-0.64°	∠°	-	-1° 45' (± 30')
		2.39°	∠°	-	-
		3.36°	∠°	-	-

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation			Model 292 except code 489
BE40.20-P-1001-09AI	Camber at vehicle level	-0.77°	∠°	-2° 8' (± 30')
		-0.64°	∠°	-
		2.39°	∠°	-
		3.36°	∠°	-

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 166.0 except code 489/491/Z04/Z05	Model 166.0 with code 489, model 166.8
BE40.20-P-1002-09AI	Permissible difference in rear axle camber between right and left side of vehicle	∠°	± 19'	± 19'

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 166.0 with code 491	Model 166.0 with code Z04/Z05
BE40.20-P-1002-09AI	Permissible difference in rear axle camber between right and left side of vehicle	∠°	± 19'	± 19'

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 166 AMG	Model 292 with code 489
BE40.20-P-1002-09AI	Permissible difference in rear axle camber between right and left side of vehicle	∠°	± 19'	± 19'

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 292 except code 489
BE40.20-P-1002-09AI	Permissible difference in rear axle camber between right and left side of vehicle	∠°	± 19'

CAMBER STRUT

Number	Designation		Model 166	Model 292
BA35.20-P-1001-02F	Self-locking nut, camber strut to rear axle carrier	Nm	90	90