Check Caster And Assign To Tabular Value - AR40.20-P-0322-03GQ
MODEL 166, 292
TEST AND ADJUSTMENT VALUES FOR CASTER
| Number | Designation | Model 166 | Model 292 | |
|---|---|---|---|---|
| BE40.20-P-1001-20G | Caster values, form See |
OF40.20-P-3000-00GQ | OF40.20-P-3000-00GQ | |
TEST AND ADJUSTMENT VALUES FOR CASTER
| Number | Designation | Model 166 | Model 292 | |
|---|---|---|---|---|
| BE40.20-P-1002-20G | Permissible difference in caster between right and left side of vehicle | ∠° | ± 30' | ± 30' |
TEST AND ADJUSTMENT VALUES FOR CASTER
| Number | Designation | Model 166 | Model 292 | |
|---|---|---|---|---|
| BE40.20-P-1003-20G | Absolute caster tolerance | ∠° | ± 30' | ± 30' |
The level values are displayed by the electronic inclinometer in decimal degrees [°].
- Obtain the caster value from the form taking into account the front axle (FA) level values and rear axle (RA) level values measured previously.
Example, see: Caster values, form on model 166 except code 489 (AIRmatic)/code Z04 (Light armoring)/code Z05 (B5-Armoring for special protection version):
Front-axle level value (FA): +9.07° rear-axle level value (RA): +3, 36° = Caster value 5° 17' (± 30')