Remove/Install Front Shock Absorber - AR32.25-P-0105GQ

MODEL 166, 292 except CODE 489 (AIRMATIC) 

	Remove
1	Remove suspension strut		AR32.25-P-1017GQ
	Disassemble
2	Disassemble suspension strut		AR32.25-P-1018GZ
3	Replace shock absorber (11)	If the shock absorber is defective.
	Check
4	Check boot (6) and stop damper (5) for wear, damage and oil fouling, replace if necessary
	Assemble
5	Assemble suspension strut		AR32.25-P-1018GZ
	Install
6	Install suspension strut		AR32.25-P-1017GQ
7	Inspect headlamp adjustment, correct if necessary
		Model 166 except code 489 (AIRMATIC)	AP82.10-P-8260GZA
		Model 292 except code 489 (AIRMATIC)	AP82.10-P-8260I