Install Rear Longitudinal Member - AR64.20-P-1200-24GQX

MODEL 166 

1. Install rear longitudinal member (1), fit and fix in place.
2. Rear longitudinal member (1) (area W₄ ).
3. Drill ø 5.5 mm holes for plug welding on rear longitudinal member (1) (areas T₁ , T₂ , T₃ , V₂ , W₁ and W₂ ).
4. Rear longitudinal member (1) (areas T₁ , T₂ , T₃ , V₁ , V₂ , V₃ , W₁ , W₂ and W₃ ).
5. Rear longitudinal member (1) (area U).
6. Clean weld joints.

   Shown on model 166.8 

7. Rear longitudinal member (1) (area Y).
8. Drill ø 5.5 mm holes for plug welding on rear longitudinal member (1) (areas X₁ , X₂ , X₃ , X₄ and Z).
9. Rear longitudinal member (1) (areas X₁ , X₂ , X₃ , X₄ and Z).
10. Clean weld joints.