Seat Belt Height Adjustment Mechanism (Front Seat) Removal And Installation - AR91.40-P-1100GQ
MODEL 166
MODEL 292
| Remove/install | |||
| 1 | Move left and right front seat as far forward as possible and move backrest to an upright position | ||
| 2 | Switch on ignition and store transmitter key outside of transmission range (min. 2 m) | ||
| 3 | Remove B-pillar paneling | AR68.30-P-4700GQ | |
| 4 | Remove screw/bolt (1) at belt guide bracket | *BA91.40-P-1006-01R | |
| 5 | Remove screw/bolt (2) and belt height adjuster | *BA91.40-P-1005-01R | |
| 6 | Install in the reverse order |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 166 | Model 292 | |
|---|---|---|---|---|
| BA91.40-P-1005-01R | Screw/bolt, belt height adjuster to B-pillar | Nm | 35 | 35 |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 166 | Model 292 | |
|---|---|---|---|---|
| BA91.40-P-1006-01R | Screw/bolt, belt guide bracket to B-pillar | Nm | 35 | 35 |