Removing, Installing Windowbag - AR91.60-P-0693GQC

MODEL 166 (except 166.8) as of model year 2016 

MODEL 166.8 up to model year 2015 

MODEL 292 

Shown on model 292 

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.	AS91.00-Z-0008-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Remove/install
1	Switch off ignition and store transmitter key outside of transmission range (min. 2 m)
2	Disconnect battery ground line		AR54.10-P-0003GZ
3	Remove headliner	Model 166 (except 166.8) as of model year 2016 with code Z05 (B5 armoring on special protection version) Model 166.8 up to model year 2015 with code Z05 (B5 armoring on special protection version)	AR68.30-P-4300GQS
		Model 166 (except 166.8) as of model year 2016 except code Z05 (B5 armoring on special protection version) Model 166.8 up to model year 2015 except code Z05 (B5 armoring on special protection version)	AR68.30-P-4300GQ
		Model 292	AR68.30-P-4300GQC
4	Release and disconnect electrical connection (1)
5	Unhook windowbag unit (7) from bracket (2)
6	Move retaining clips (4) to one side and unclip
7	Remove screw/bolts (6)	Bolt/nut, windowbag to body	*BA91.60-P-1006-01H
8	Remove windowbag unit (7)
9	Install in the reverse order
	Check
10	Check and erase vehicle fault memory using the diagnostic system	When replacing windowbag unit (7).
			AD00.00-P-2000-04A