LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2018 >> GLE550 >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seats, Bunks, Restraint Systems - 166 Chassis - 2 Of 3 >> Testing & Repair >> Removing, Installing Windowbag >> Removing, Installing Windowbag - AR91.60-P-0693GQ

Removing, Installing Windowbag - AR91.60-P-0693GQ

MODEL 166 (except 166.8) up to model year 2016 

MODEL 166.8 as of model year 2016 

Shown on model 166.024 

G12082964

Shown on model 166.873 

G12082965
CAUTION Warning Risk of injury  during testing and repair operations related to pyrotechnical components Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F.
Disconnect current supply when working on such component parts.
AS91.00-Z-0008-01A
  Notes on self-locking nuts and bolts   AH00.00-N-0001-01A
  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
  Information, assessment and legal requirements when working with, handling and storing pyrotechnical components   AH91.00-Z-0000-10A
REMOVINGINSTALLING Remove/install     
1 Switch off ignition and store transmitter key outside of transmission range (min. 2 m)    
2 Disconnect ground line to battery   AR54.10-P-0003GZ
3 Remove headliner Model 166 (except 166.8)
up to model year 2016
with code Z05 (B5 armoring on special protection version)
Model 166.8
as of model year 2016
with code Z05 (B5 armoring on special protection version)
AR68.30-P-4300GQS
Model 166 (except 166.8)
up to model year 2016
except code Z05 (B5 armoring on special protection version)
Model 166.8
as of model year 2016
except code Z05 (B5 armoring on special protection version)
AR68.30-P-4300GQ
4 Release and disconnect electrical connection (1)    
5 Remove bolts (2) TORQUE SPECIFICATION Screw/bolt, windowbag check strap bracket to body *BA91.60-P-1005-01H 
6 Remove expansion rivets (3)    
7 Move retaining clips (4) to one side and unclip    
8.1 Unscrew nuts (5). Model 166 (except 166.8)
up to model year 2016
TORQUE SPECIFICATION Bolt/nut, windowbag to body
*BA91.60-P-1006-01H 
8.2 Unscrew nut Model 166.8
as of model year 2016
TORQUE SPECIFICATION Bolt/nut, windowbag to body
*BA91.60-P-1006-01H 
9 Remove bolt (6) TORQUE SPECIFICATION Bolt/nut, windowbag to body *BA91.60-P-1006-01H 
10 Remove windowbag unit (7)    
11 Install in the reverse order    
INSPECT Check     
12
REFER TO SELF-DIAGNOSTIC SYSTEMS
Check and erase vehicle fault memory using the diagnostic system When replacing windowbag unit (7). AD00.00-P-2000-04A
AIRBAG

Number Designation Model 166
BA91.60-P-1005-01H Screw/bolt, windowbag check strap bracket to body Nm 8
AIRBAG

Number Designation Model 166
BA91.60-P-1006-01H Bolt/nut, windowbag to body Nm 8