Remove/Install Trim At C-Pillar - AR68.30-P-4490GQX

MODEL 166.8 

	Remove/install
1	Remove side paneling in trunk		AR68.30-P-4800GQX
2	Remove sealing weather strip (2) in area of paneling (1)
3	Pry off lower paneling (i) and pull out of guide (1a) in direction of arrow	: Ensure that paneling (1) and window seal (3) are seated correctly. Mounting wedge	Figure
4	Install seat belt and remove paneling (1)
5	Install in the reverse order

Fig 1: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA