Remove/Install Center Air Nozzle - AR68.10-P-1150GQ

MODEL 166, 292 

Shown on model 166 

	Remove/install
1	Remove radio/COMAND controller unit		AR82.60-P-7502GQ
2	Remove radio display	Model 292	AR82.60-P-7722GQC
3	Unscrew bolts (3) on center air vent (1)
4	Unclip center air vent (1)	Position extraction hooks (01) at top on center air vent (1).
		Ensure that center air vent (1) is installed correctly in instrument panel.
		Extraction hook	Fig 1
5	Unclip electrical connect and disconnect	Model 292
6	Remove center air vent (1)
7	Install in the reverse order

Fig 1: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA