Retrofit Media Interface Control Unit - AN82.60-P-0016-01GQ

MODEL 166.0 except CODE (523) MB Audio 20 radio 

1. Remove water channel (1).
2. Remove foam material (2) from transmission tunnel (3).

   Remove carefully. Otherwise the foam material may be damaged.

3. Insert media interface control unit (N125/1) between the shackles (4) of the insulation mat (5).
4. Connect electrical connectors to media interface control unit (N125/1).
5. Place foam material (2) back onto the media interface control unit (N125/1).

   Put on carefully. Otherwise the foam material may be damaged.

6. Attach water channel (1).