Retrofit Drive Kit Plus Bluetooth Module For The Apple Iphone - AZ82.60-P-0019-07GQ

MODEL 166.0 

MODEL 166.8 

The following operation steps describe installation in a left-hand drive vehicle. With right-hand drive vehicles these operation steps must be carried out mirror-inverted.

1. Stick felt tape (47) to top of Bluetooth module (35).
2. Stick Velcro strip (48) to bottom of Bluetooth module (35).
3. Route connection line (41) from Drive Kit Plus control unit to installation location of Bluetooth module (35) and fix in place using felt tape.
4. Connect black 4-pin connector (40.1) to Bluetooth module (35).
5. Connect white 4-pin connector (41.1) to Bluetooth module (35).
6. Remove carrier foil on Velcro strip of Bluetooth module (35).
7. Stick Bluetooth module (35) into front passenger footwell.