LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2018 >> GLE550 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Electrical System - Body - 166 Chassis - 4 Of 8 >> Testing & Repair >> Remove/Install Display In Rear - AR82.60-P-7720SXS

Remove/Install Display In Rear - AR82.60-P-7720SXS

MODEL 166, 212 with CODE (864) Rear entertainment system 

MODEL 221.0/1 as of 1.6.09 with CODE (864) Rear entertainment system 

MODEL 221.0/1 

with CODE (864) Rear entertainment system 

with CODE (800) Model year 2010 

Shown on model 212 

G12081695

Shown on model 221 

G12081696
REMOVINGINSTALLING Remove/install    
TORQUE SPECIFICATION Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
1 Buffer basic data of rear entertainment system in STAR DIAGNOSIS When replacing the left rear display (A40/5) or the right rear display (A40/6).
INSTALLATION IMPORTANT Transfer buffered basic data to rear entertainment system.
AD00.00-P-2000-04A
2.1 Move head restraint (1) on front seat up Model 166, 212  
2.2 Remove front seat head restraint (1) Model 221 AR91. 16-P-0040SX
3 Unclip bezel (2) (arrows) NOTES Carefully unclip bezel (2). Otherwise the bezel (2) may be damaged.
SPECIAL TOOL
Figure
4 Remove screws/bolts (3)    
5 Disconnect electrical connectors (4)    
6 Remove left rear display (A40/5) or right rear display (A40/6) INSTALLATION IMPORTANT Note assembly position of left rear display (A40/5) or right rear display (A40/6) on the bracket (5).
In models 166, 212 the bracket (5) is hooked into the left rear display (A40/5) or right rear display (A40/6) (arrow).
With model 221 the bracket (5) is placed onto the left rear display (A40/5) or right rear display (A40/6) (arrow).
 
7 Install in the reverse order    
Fig 1: Identifying Extraction Hook (140 589 02 33 00)
G07627544Courtesy of MERCEDES-BENZ USA