Cut Out Cover With Cutting Wire - AR82.70-P-8952-02EW
MODEL 117.3
MODEL 166, 172.4, 218
MODEL 212.0/2
as of model year 2011
MODEL 222
MODEL 242, 246
with CODE 362 (HERMES LTE)
with CODE 460 (Canada version)
MODEL 242, 246
with CODE 362 (HERMES LTE)
with CODE 494 (US version)
MODEL 242, 246
with CODE 536 (SIRIUS satellite radio)
MODEL 292
| Risk of injury caused by tearing of the cutting wire | Wear safety glasses. | AS88.00-Z-0001-01A |
The cover (1) is destroyed when cut out and it has to be replaced.
- Cut cutting wire (2) to a length of approx. 50 cm and attach pull handles (3) at both ends.
- Place cutting wire (2) on left around adhesive bead of cover (1) and cut adhesive material.
Move cutting wire (2) upwards against the cover (1). Otherwise the paint will be damaged.
- Place cutting wire (2) on right around adhesive bead of cover (1) and cut adhesive material.
- Remove cover (1).
The cover (1) can be removed by hand once the adhesive bead has been cut completely.