Retrofit Adaptive Highbeam Assist - AN82.10-P-0010GQ

MODEL 166.### 1# up to 7/8/15 

with CODE 238 (Active lane keeping Assist) 

with CODE 622 (Intelligent Light System) 

MODEL 166.### 1# up to 7/8/15 

with CODE 476 (Lane keeping assist) 

with CODE 622 (Intelligent Light System) 

MODEL 166.### 1# up to 7/8/15 

with CODE 513 (Speed Limit Assist) 

with CODE 622 (Intelligent Light System) 

MODEL 166.### 2# up to 7/8/15 

with CODE 238 (Active lane keeping Assist) 

with CODE 621 (Intelligent Light System (left-hand traffic)) 

MODEL 166.### 2# up to 7/8/15 

with CODE 476 (Lane keeping assist) 

with CODE 621 (Intelligent Light System (left-hand traffic)) 

MODEL 166.### 2# up to 7/8/15 

with CODE 513 (Speed Limit Assist) 

with CODE 621 (Intelligent Light System (left-hand traffic)) 

	Initial startup
1	Order retrofitting via parts ordering process, specifying vehicle identification number (FIN)	Further Information available in the Aftersales Portal at: Info-Center → PIT Aftersales →Parts → Genuine parts → Cars
	Update Vehicle Documentation (VeDoc)
2	Enter special equipment into the online vehicle data card	Code 608 (Adaptive Highbeam Assist)
3	Attach note Adaptive Highbeam Assist retrofitted as per AN82.10-P-0010GQ under field organization texts to design group 54 and design group 82
4	Connect diagnostic system and select vehicle using FIN		AD00.00-P-2000-04A
5	Carry out variant coding using software calibration number (SCN)	Central gateway (CGW)  Signal acquisition and actuation module (SAM)  Multifunction camera (MFK)  Instrument cluster (KI)  Headlamp (SW)
6	Disconnect diagnostic system		AD00.00-P-2000-04A
	Check
7	Perform function test	See owner's manual.

Part no.	Designation	Quantity
KG 99	Parts kit for automatic high beam control software retrofit	1