Dynamic Select Function - GF32.00-P-0002RF
Model 205 as of model year 2016 with code B59 (DYNAMIC SELECT)
Model 253 with code B59 (DYNAMIC SELECT)
View of center console, model 253 with automatic transmission and code 430 (off-road package), except hybrid vehicles
DYNAMIC SELECT
The DYNAMIC SELECT function integrates essential vehicle systems that determine the driving experience.
- Except AMG vehicles
- Electric steering
- AIRMATIC (model 205 with code 489 (AIRMATIC)) or AIR BODY CONTROL (model 253 with code 489 (AIR BODY CONTROL))
- ECO start/stop function
- Climate control
- Drivetrain
- AMG vehicles
- Electric steering
- Adaptive damping system
- ECO start/stop function
- Drivetrain
- Transmission mode
- Electronic Stability Program (ESP®)
- Climate control
- Exhaust system (with code U78 (AMG Sport exhaust system))
Among other things, the characteristics of the accelerator pedal response, vehicle-speed dependent steering support, automatic transmission switch points and accelerator pedal curve are affected in vehicles with manual transmissions. In addition, the ECO start/stop function can be activated or deactivated in the "Individual" drive program. The following transmission modes are available:
- ECO (except AMG vehicles)
- Comfort
- Sport
- SPORT PLUS
- Individual
- RACE (AMG vehicles)
The driver can choose between the different drive programs using the DYNAMIC SELECT switch (automatic transmission) or the DYNAMIC SELECT switch (N72/5s6) (manual transmission). The selected drive program is displayed as a symbol in the instrument cluster (A1). In addition, the current settings are briefly displayed in the Audio/COMAND display (A40/8). The head unit (A26/17) generates the presentation in the Audio/COMAND display and sends corresponding image data via the Low Voltage Differential Signaling (LVDS) line.
The left lower control panel (automatic transmission) or right lower control panel (N72/5) (manual transmission) directly reads in the signals of the DYNAMIC SELECT switch and transmits these to the ESP® control unit (N30/4) via the LCP-LIN (LIN A3), Audio/COMAND control panel (A40/9) (model 205 except code 446 (Touchpad only), model 253) or touchpad (A105) (model 205 with code 446 (Touchpad only)), telematics CAN (CAN A), head unit, user interface CAN (CAN HMI), electronic ignition lock control unit (N73) and suspension FlexRay (Flex E).
The Electronic Stability Program control unit sends the information for the selected drive program to the relevant control units. These switch the stored parameters for the respective drive program. The pre-configured parameters are listed in the following table.
| ECO | Comfort | Sport | SPORT PLUS | Individual | Comment | |
|---|---|---|---|---|---|---|
| Steering | Comfort | Comfort | Sport | Sport | Comfort/sport | The level of support for the electric power steering is reduced in the Sport and Sport Plus transmission mode. |
| Drive | ECO | Comfort | Sport | SPORT PLUS | ECO/Comfort/Sport/Sport Plus/M | For model 205 (with automatic transmission, except AMG vehicles), manual shifting mode is contained in the Individual drive program. |
| ECO start-stop | On | On | On | OFF | On/Off | |
| Suspension (model 253 with code 489 (AIR BODY CONTROL) or mode 205 with code 489 (AIRMATIC)) | Comfort | Comfort | Sport | SPORT PLUS | Comfort/Sport/Sport Plus/ | |
| Climate control | ECO | Comfort | Comfort | Comfort | ECO/Comfort | |
| ECO Assistant | On | OFF | OFF | OFF | On/Off | Valid for plug-in hybrid |
| Comfort | Sport | SPORT PLUS | Individual | Race | |
|---|---|---|---|---|---|
| Drive | Comfort | Sport | SPORT PLUS | Comfort, Sport, Sport Plus, RACE | Race |
| Transmission | Drive | Drive | Drive | Manual, Drive | Drive |
| ESP® | On | On | On | On, Sport | Sport |
| Chassis | Comfort | Sport | SPORT PLUS | Comfort, Sport, Sport Plus | SPORT PLUS |
| Exhaust flap (with CODE U78 (AMG Sport exhaust system)) | Comfort | Sport | SPORT PLUS | Comfort, Sport, Sport Plus | SPORT PLUS |
| Steering | Comfort | Sport | SPORT PLUS | Depending on "Suspension" setting | SPORT PLUS |
| ECO start-stop | On | OFF | OFF | Depending on "Drive" setting | OFF |
| Driver assistance system (with code 23P (Driving Assistance Package)) | Comfort | Sport | Sport | Depending on "Drive" setting | Sport |
| Air conditioning, heating | Comfort | Comfort | Comfort | Always "Comfort" | Comfort |
| Deceleration mode | On | OFF | OFF | Depending on "Drive" setting | OFF |
When the transmission mode is changed, the appropriate settings valid for the selected transmission mode are made.
The ESP® OFF function is not an integral part of DYNAMIC SELECT.
Changing the drive program does not affect the setting.
If the vehicle is parked, the selected drive program is stored for up to 4 h (Last Mode). After 4 h, the comfort drive program is set automatically.
The Last Mode function is not supported in vehicles with code 494 (USA version).
Off-road programs (model 253 with code 430 (Off-road package))
The off-road menu in the Audio/COMAND display is called up by pressing the on-road/off-road menu button. The desired off-road program can then be selected using the Audio/COMAND controller. The selected off-road program is displayed as a symbol in the instrument cluster. The following off-road programs can be selected:
- Slippery conditions
- OFF-ROAD
- Incline
- Trailer (with code 550 (Trailer hitch))
- Rocking vehicle free (with CODE 489 (AIR BODY CONTROL))
The off-road control panel directly reads in the status of the on/off-road menu button and transmits this to the ESP® control unit via the LCP-LIN, Audio/COMAND control panel, telematics CAN, head unit, user interface CAN, electronic ignition lock control unit and suspension FlexRay. The Electronic Stability Program control unit sends the information for the selected drive program to the relevant control units.
| Slippery conditions | OFF-ROAD | Incline | Trailer | Rocking vehicle free (with CODE 489 (AIR BODY CONTROL)) | Comment | |
|---|---|---|---|---|---|---|
| Steering | Comfort | Comfort | Comfort | Comfort | Comfort | The level of support for the electric power steering is reduced in the Sport and Sport Plus transmission mode. |
| Drive | Comfort | O1 | O2 | Comfort | O1 | - |
| ECO start-stop | On | OFF | OFF | On | OFF | - |
| Suspension (with CODE 489 (AIR BODY CONTROL)) | O1 | O2 | O2 | O1 | O3 | O1: Normal level and Comfort dampening setting O2: Level +15 mm or +30 mm (with code 494 (USA version)) and comfort dampening setting O3: Level +50 mm and Comfort dampening setting |
| Climate control | Comfort | Comfort | Comfort | Comfort | Comfort | - |
| Automatic transmission (AT), drive programs | Model 253 with transmission 725.0 with code B59 (DYNAMIC SELECT) | GF27.10-P-0001-06ANI | |
| Overview of system components of AIR BODY CONTROL | Model 253 with code 489 (AIR BODY CONTROL) with code B59 (DYNAMIC SELECT) |
GF32.22-P-9993RF | |
| Overview of system components for AIRMATIC | Model 205 as of model year 2016 with code 483 (ADVANCED AGILITY package) with code 489 (AIRMATIC) with code B59 (DYNAMIC SELECT) |
GF32.22-P-9994RF |