Wiring Diagram For All-Wheel Drive Control Unit - PE28.19-P-2102-97FBA
Model 253 with engine 177, 276 up to model year 2020
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 32L |
| B91 | Transmission oil temperature sensor | 24L |
| F1/3 | Passenger-side A-pillar fuse box | 3L |
| F1/3 | Passenger-side A-pillar fuse box | 12L |
| F1/3f310 | Fuse 310 | 10K |
| F1/3f315 | Fuse 315 | 2K |
| K40/5 | Rear fuse and relay module | 16L |
| K40/5 | Rear fuse and relay module | 7L |
| K40/5f454 | Fuse 454 | 15L |
| K40/5f457 | Fuse 457 | 6L |
| N45 | All-wheel drive control unit | 12A |
| N45 | All-wheel drive control unit | 20A |
| N73 | Electronic ignition switch control unit | 21L |
| W15/7 | Right front footwell ground point | 19E |
| X15/16 | Transmission oil temperature sensor electrical connector | 23H |
| X18 | Cockpit wiring harness and frame floor assembly electrical connector | 20H |