Perform Initial Startup Of Mercedes-Benz Dashcam - AZ54.71-P-0001-02LWE

Model 167, 205, 213, 222, 238, 253, 257 

National settings for Mercedes-Benz dashcam

GF54.71-P-0010-02LWE

1. Switch on ignition.
2. Press WiFi® button (1.7) and EVENT button (1.8) for at least 6 seconds.

   This starts the diagnosis/dealer mode.

3. Connect a WiFi®-capable terminal (e.g. smartphone) with front Dashcam.
4. Start an Internet browser and call up the diagnostics .
5. Align front Dashcam vertically.

   In the lower picture area, the front contour of the vehicle must be visible.

6. Align rear Dashcam vertically.

   Only if a rear Dashcam back has been retrofitted.

   The lower edge of the rear window must be visible in the lower picture area.

7. Adapt country settings as per specifications.

   Courtesy of MERCEDES-BENZ USA