Remove/Install Door Frame Seal - AR72.10-P-2120LW

Model 205.0/1/2 

Model 213 

Model 253 

Model 293 

Courtesy of MERCEDES-BENZ USA

Shown on model 205.0 except code 810 (Sound-System) 

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Remove
1	Switch off ignition and store transmitter key outside of transmission range (min. 2 m).
2	Remove mirror triangle cover (3).	Model 205.0/1/2, 253, 293 with code 810 (Sound system) Model 205.0/1/2, 253, 293 with code 853 ("Midline" sound system) Model 213 Allow mirror triangle cover (3) to hang down with connected electric line.	AR72.10-P-3001LW
3	Remove window frame lining (4)	The window frame lining (4) is fastened positively to the window frame and additionally clipped into the window frame with a retaining clip (4.1) in the area of the mirror triangle cover (3).
		Long wedge	Fig 1
4	Release left front door control unit (N69/1) and right front door control unit (N69/2) from the front door (2).	Model 205.0 except code 700 (Technology Local Content China)
5	Detach sealing frame (5) from the front door (2).
6	Remove adhesive residue from front door (2) using a surface conditioning disk and clean bonding surface.
	Notes on removing adhesive residues and foils on paint and metal surfaces with surface conditioning disks		AH00.00-P-0013-01AK
		The bonding surface must be free of dust and grease. Use surface conditioning disk with a diameter of 100 mm.
		Cleaner	*BR00.45-Z-1025-04A
	Install
7	Glue sealing frame (5) onto the front door (2).	Model 205.0 except code 700 (Technology Local Content China)	AR72.10-P-2120-05LW
		Model 205.0 with code 700 (Technology Local Content China)	AR72.10-P-2120-05LWA
		Model 205.1/2, 213, 253, 293
		Roller	Fig 2
		Model 205.0 except code 700 (Technology Local Content China)	Fig 3
		Template
8	Fasten left front door control unit (N69/1) and right front door control unit (N69/2) to the front door (2).	Model 205.0 except code 700 (Technology Local Content China)
9	Attach window frame lining (4) to the window frame.
10	Install mirror triangle cover (3).		AR72.10-P-3001LW

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Roller (168 589 05 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Template (205 589 01 23 00)

Courtesy of MERCEDES-BENZ USA