Install Front Glass Cover - AR77.21-P-7010-05CW

Model 117 with code 413 (Automatic panoramic sliding sunroof) 

Model 156 with code 413 (Automatic panoramic sliding sunroof) 

Model 176 with code 413 (Automatic panoramic sliding sunroof) 

Model 204.0/2/3/9 with code 413 (Automatic panoramic sliding sunroof) 

Model 205 with code 413 (Automatic panoramic sliding sunroof) 

Model 222 with code 398 (Panoramic roof with MAGIC SKY CONTROL) 

Model 222 with code 413 (Automatic panoramic sliding sunroof) 

Model 242 with code 413 (Automatic panoramic sliding sunroof) 

Model 246 with code 413 (Automatic panoramic sliding sunroof) 

Model 253 with code 413 (Automatic panoramic sliding sunroof) 

Only use materials from repair kit approved and always observe processing notes included.

Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured.

Shown on model 204 

Courtesy of MERCEDES-BENZ USA

1. Align front glass cover (1) in relation to windshield (2) and panoramic sliding roof (3) according to gap dimensions (A, B) determined during removal.
2. Align front glass cover (1) at transitions (C) level to panoramic sliding roof (3).
3. 1. 3.1 Model 117 with code 413 (Automatic panoramic sliding sunroof)

      Model 156 with code 413 (Automatic panoramic sliding sunroof)

      Model 176 with code 413 (Automatic panoramic sliding sunroof)

      Model 204.0/2/3/9 with code 413 (Automatic panoramic sliding sunroof)

      Model 242 with code 413 (Automatic panoramic sliding sunroof)

      Model 246 with code 413 (Automatic panoramic sliding sunroof)

      Adjust to gap dimension (A) the feeler gauges (4) and insert between front glass cover (1) and windshield (2).

      The feeler gauges (4) serve as spacers during the curing time of the adhesive.

   2. 3.2 Model 205 with code 413 (Automatic panoramic sliding sunroof)

      Model 222 with code 398 (Panoramic roof with MAGIC SKY CONTROL)

      Model 222 with code 413 (Automatic panoramic sliding sunroof)

      Model 253 with code 413 (Automatic panoramic sliding sunroof)

      Secure front glass cover (1) against slipping with adhesive strips.

4. Carefully remove cup suction tool.
5. Put loads on front glass cover (1) during curing time of adhesive.

   Use weights with large surface such as sandbags.

   Otherwise the front glass cover (1) can be damaged.