Remove/Install Rear-End Door Frame Seal - AR72.20-P-3540LWG
Model 253
Model 293
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Unclip cover (2) and remove. | ||
| 2 | Unclip covers (3) and remove. | ||
| 3 | Remove sealing frame (1). | Do not use any lubricant. Otherwise leakage can occur later. |
|
| 4 | Clean body flange. | Cleaner | *BR00.45-Z-1025-04A |
| 5 | Install in the reverse order. |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1025-04A | Cleaner | A 005 989 19 71 |