Wiring Diagram Of Exterior Lights - PE82.10-P-2000-97FCD
Model 253 (except 253.99) as of model year 2020 Rear lamps Model 253.99 as of model year 2019 with code 9O1 (Fuel cell pre-installation) Rear lamps
| Code: | Designation: | Position: |
| A0 | Use of wiring diagrams | 32L |
| C7/1 | Interference suppression filter (12V) | 19L |
| Code 9O1 | Fuel cell retrofitting | 13D |
| Code 9O1 | Fuel cell retrofitting | 17D |
| Code FC | COUPE | 3D |
| Code FC | COUPE | 7D |
| E19/1 | Left license plate lamp | 4L |
| E19/1 | Left license plate lamp | 9L |
| E19/2 | Right license plate lamp | 6L |
| E19/2 | Right license plate lamp | 10L |
| E21 | Center stop lamp | 15L |
| E21 | Center stop lamp | 21L |
| E40/2 | Left trunk lid/liftgate ambient lamp and warning lamp | 2L |
| N10/8 | Rear SAM control unit | 4A |
| N10/8 | Rear SAM control unit | 12A |
| N10/8 | Rear SAM control unit | 21A |
| W29/9 | Right D-pillar ground point | 24L |
| W8/12 | Upper right liftgate ground point | 19H |
| W8/12 | Upper right liftgate ground point | 24E |
| W8/2 | Right tailgate ground point | 12L |
| X26/40 | Rear frame floor assembly/bumper electrical connector | 8F |
| Z6/92z1 | Trunk lid ground line connector sleeve | 12E |
| Z75/1z1 | License plate lamp connector sleeve | 4G |
| Z75/1z1 | License plate lamp connector sleeve | 8H |
| Z75/3z1 | - | 10G |