Remove/install front Adaptive Damping System (ADS) acceleration sensor - AR32.32-P-0001NKM
MODEL 117, 156, 176, 246 with CODE 459 (Steel suspension with adjustable damping)
Shown on MODEL 176
Fig 1: Front Adaptive Damping System Acceleration Sensor Remove/Install Component - Shown On Model 176
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Switch off ignition and keep transmitter key at a location beyond transmitter range (at least 2 m) | ||
| 2 | Detach corresponding complete wheel | ||
| AP40.10-P-4050AK | |||
| 3 | Remove front fender liner | AR88.10-P-1300NKB | |
| 4 | Detach electrical connection (2) from ADS acceleration sensor (1) | ||
| 5 | Remove bolt (3) from ADS acceleration sensor (1) | ||
| 6 | Remove ADS acceleration sensor (1) | ||
| 7 | Install in the reverse order |