Wiring diagram of chassis CAN - PE00.19-P-2195IAA

MODEL 117 as of 9/1/15, 156 as of 9/1/15, 176 as of 9/1/15, 242 as of 9/1/15, 246 as of 9/1/15 

except CODE 234 (Blind Spot Monitoring) 

except CODE 459 (Steel suspension with adjustable damping) 

except CODE 218 (Rear view camera) 

except CODE 476 (Lane keeping assist) 

except CODE 513 (Speed Limit Assist) 

except CODE 614 (Bi-xenon headlamps) 

except CODE 615 (Bi-xenon headlamps with active light function) 

except CODE 618 (Bi-xenon headlamps) 

except CODE 621 (Intelligent Light System (left-hand traffic)) 

except CODE 622 (Intelligent Light System) 

except CODE 631 (Headlights, LED, static left-hand traffic ) 

except CODE 632 (Headlamps, LED, static, right-side traffic) Potential distributor X30/30 (CAN E) 

MODEL 117 up to 8/31/15, 156 up to 8/31/15, 176 up to 8/31/15, 242 up to 8/31/15, 246 up to 8/31/15 Potential distributor X30/30 (CAN E) 

	Wiring diagram of chassis CAN		PE00.19-P-2195-97IAA
	Abbreviations of signal and circuit designations for wiring diagrams		OV00.01-P-1001-28IAA
	Use of wiring diagrams		OV00.01-P-1901-03IAA
	Search aid for all electrical components		OV00.01-P-1909IAA
	Location and assignment of line and plug connectors		GF00.19-P-1000IAA
	Location and assignment of ground points		GF00.19-P-2000IAA
	Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness)		GF00.19-P-3000IAA
	Fuse and relay box, as-built configuration		GF54.15-P-0800KN