000 588 11 62 00 Major assembly mount - WS01.00-P-0092B
ENGINE ALL
Use in FG 01/25/27/28/33/35/41/46/47/49/55/Set B
Purpose:
Universal, transmission jack for lifting and for mounting and disassembly of major assemblies.
Reference information:
This criteria catalogue serves to provide support for selection of variants of workshop equipment available on the free market. It just describes the minimum requirement for fulfilling the Mercedes-Benz standard. There is therefore no cover to manufacturer specific equipment or devices.
NOTE:
Observe for ordering purposes that the standard dimension is 35mm; this can be achieved if necessary using an adapter.
Use In combination with suitable attachment (for example: transmission plate).
Minimum requirements:
- Mercedes-Benz standard diameter for mounting hole: 35 mm
- Minimum load carrying capacity for transporter: 1.0 t
- Minimum load carrying capacity for commercial vehicle: 2.0 t