Remove/Install Front Stabilizer Bar - AR32.35-P-2050BD
Model 461 Model 463 (except 463.234/255/274) up to model year 2013
MODIFICATION NOTES
| 18.12.2019 | Document completely revised. |
Shown on model 463.270
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Notes on repair work on suspension components | AH00.00-P-0100-01A | ||
| Remove/install | |||
| 1 | Lift vehicle with vehicle lift. | AR00.60-P-1006A | |
| 2 | Remove nuts (2) and remove holders (3). | *BA32.35-P-1001-01A | |
| 3 | Remove heat shield (4). | If installed. | |
| 4 | Remove nuts (5) and remove stabilizer (1) with holders (6). | *BA32.35-P-1003-01A | |
| 5 | Remove nuts (7) and remove holders (6) from stabilizer (1). | When replacing stabilizer (1). |
*BA32.35-P-1002-01A |
| 6 | Check elastomer bearings of stabilizer (1) for wear and damage. | If problems exist, ↓ Replace relevant elastomer bearing(s). |
|
| 7 | Install in the reverse order. |
STABILIZER BAR MOUNTING BAR TO TRAILING ARM
| Number | Designation | Model 460, 461 Model 463 up to model year 2013 | |
|---|---|---|---|
| BA32.35-P-1001-01A | Nut, stabilizer bar mounting bar to trailing arm | Nm | 50 |
STABILIZER BAR TO STABILIZER BRACKET
| Number | Designation | Model 460, 461 Model 463 up to model year 2013 | |
|---|---|---|---|
| BA32.35-P-1002-01A | Nut, stabilizer bar to stabilizer bracket | Nm | 90 |
STABILIZER BRACKET TO FRAME
| Number | Designation | Model 460, 461 Model 463 up to model year 2013 | |
|---|---|---|---|
| BA32.35-P-1003-01A | Nut, stabilizer bracket to frame | Nm | 90 |