Remove/Install Left Rear Body Acceleration Sensor - AR32.22-P-0005XG

Model 463 as of model year 2019 

Fig 1: Left Rear Body Acceleration Sensor Components Location - Model 463 As Of Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Switch off ignition and store transmitter key outside of transmitter range (at least 2 m).
2	Remove left side load compartment trim.		AR68.30-P-1185XG
3	Disconnect electrical connector (1) at left rear body acceleration sensor (B24/5).
4	Unscrew nut (2) on left rear body acceleration sensor (B24/5).	The left rear body acceleration sensor (B24/5) is sensitive to shocks.
5	Remove left rear body acceleration sensor (B24/5).
6	Install in reverse order.