Stabilizer Bars - Check for tight seating, retighten - AP32.35-P-3270G
Model 460, 461
Model 463 up to model year 2019
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| 1 |
Raise vehicle with vehicle lift Lift/jack up vehicle | AR00.60-P-1000G | |
| 2 | Check nuts (1) of stabilizer bars on front and rear axles for tight seating and tighten if necessary | *BA32.35-P-1001-01A | |
| 3 | Check nuts (2) of stabilizer bars on front and rear axles for tight seating and tighten if necessary | *BA32.35-P-1002-01A | |
| 4 | *BA32.35-P-1003-01A | ||
| 5 | Lower vehicle |
STABILIZER BAR/TORSION BAR
| Number | Designation | Model 460, 461 Model 463 up to model year 2019 | Model 463 as of model year 2019 | |
|---|---|---|---|---|
| BA32.35-P-1001-01A | Nut, stabilizer bar mounting bar to trailing arm | Nm | 50 | - |
STABILIZER BAR/TORSION BAR
| Number | Designation | Model 460, 461 Model 463 up to model year 2019 | Model 463 as of model year 2019 | |
|---|---|---|---|---|
| BA32.35-P-1002-01A | Nut, stabilizer bar to stabilizer bracket | Nm | 90 | - |
STABILIZER BAR/TORSION BAR
| Number | Designation | Model 460, 461 Model 463 up to model year 2019 | Model 463 as of model year 2019 | |
|---|---|---|---|---|
| BA32.35-P-1003-01A | Nut, stabilizer bracket to frame | Nm | 90 | - |