Remove And Install Cover On Rear Seat Cushion - AR91.18-P-1850XG

Model 463 

as of model year 2019 

40% rear seat 

Courtesy of MERCEDES-BENZ USA

Fig 1: Cover On Rear Seat Cushion Components Location - Model 463 As Of Model Year 2019 40% Rear Seat

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove rear seat.	Only the 40% rear seat. Place rear seat with cover downward on a suitable, clean mat. Otherwise, the seat cushion gets soiled or damaged.	AR91.12-P-1000XG
2	Press catch tab (1) and unclip release handle (2).	Long wedge	Fig 2
3	Unhook seat cushion cover (4) (arrows).	If necessary, relieve load on seat cushion cover (4) by pressing down seat cushion frame (6).
4	Remove seat cushion cover (4) with seat cushion padding (5) from seat cushion frame (6).
5	Turn over seat cushion cover (4).	Pull seat cushion cover (4) over the edge of the seat cushion padding (5). Ensure the corner plates of the seat cushion padding (5) are seated correctly.
6	Unhook staple wires of seat cushion cover (4) at seat cushion padding (5) from retaining clips (3).	If necessary, relieve load on seat cushion cover (4) by pressing down seat cushion padding (5).
7	Remove seat cushion cover (4) from seat cushion padding (5).	Fold in seat cushion cover (4) at side, place on the seat cushion padding (5) and align.
8	Install in reverse order.

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA