000 588 05 90 00 Clamping Grommet - WS00.00-P-0036B
Model 100, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 123, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 242, 245, 246, 251, 253, 292
Model all
Use in FG 00 / set B
Purpose:
Clamp grommet for suctioning off exhaust on vehicle.
Technical note:
Inner tube clamping
Procurement information:
This workshop equipment is not distributed through the regular replacement part ordering process in GLC/LC, but directly from the manufacturer/supplier. Recommended workshop equipment and information on the manufacturers/suppliers can be found in the WS document (see below).
Manufacturer 1
Nederman GmbH
- Type/model: Inner tube clamping
Article no.: 20867661
Manufacturer 2
NORFI Absaugtechnik GmbH
- Type/model: Inner tube clamping
Article no.: 25-4950-100