Read Out Maintenance Data From Instrument Cluster And Reset Service Indicator - AP00.20-P-0043I

Model 463 

as of Model year 2013 up to Model year 2015 

Courtesy of MERCEDES-BENZ USA

	Dialing
1	Bring up workshop level on instrument cluster		AP00.20-P-0046A
2	Press scroll back button (4) repeatedly until "ASSYST PLUS" is highlighted
3	Confirm selection "ASSYST PLUS" with OK button (3)	The tabs "Service data" and "Full service" appear on the multifunction display (6).
	Reset service data
4	Press scroll back button (4) until "Full service" is highlighted and confirm selection with OK button (3)	The current service items are shown on the multifunction display (6).
5	Press scroll back button (4) repeatedly until "Confirm Serv." is highlighted in multifunction display (6) and confirm selection with OK button (3)	The oil selection or "Service carried out?" appears on the multifunction display (6).
6	Select specification for engine oil used with scroll forwards button (7) and confirm selection with the OK button (3)	For vehicles with oil selection. In order to achieve the maximum kilometer interval, use and confirm engine oil as per Specifications for Operating Fluids sheet 229.5 for gasoline engines and engine oil as per Specifications for Operating Fluids sheet 229.51 for diesel engines.
7	Press scroll back button (4) until "Yes" is highlighted and confirm selection with OK button (3)	"Reset not possible" is shown on the multifunction display (6).
8	Press scroll back button (4) until "Confirm" is highlighted and confirm selection with OK button (3)	"Full service completed" is shown on the multifunction display (6). If the service is not performed or only partly performed after resetting the maintenance computer. ↓ Reset maintenance computer to default value again.
	Deactivation
9	Close workshop level on instrument cluster		AP00.20-P-0046A