Remove/Install Paneling On Rear Pillar - AR68.30-P-4505GW
Model 463 (except 463.202)
as of model year 2013 up to model year 2019
| Remove/install | |||
| 1 | Remove the edge guard (1) on the door pillar. | ||
| 2 | Remove trim of the rear pillar (2) to the side. | ||
| 3 | Disconnect electrical connector from the rear left surround speaker (H4/7) or the rear right surround speaker (H4/8). | ||
| 4 | Install in reverse order. |