Remove/Install Inside Rearview Mirror - AR68.40-P-0001GW

Model 463 

as of model year 2013 up to model year 2019 

Fig 1: Inside Rearview Mirror Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Notes on battery		AH54.10-P-0001-01A
	Remove/install
1	Remove ground line at battery.	Model 463 (except 463.234/236/241/242/248) as of model year 2013 up to model year 2019	AR54.10-P-0003GW
2	Remove overhead control panel control unit.		AR82.20-P-1000GW
3	Disconnect electrical connector at hands-free system microphone (A67b1).	The separating point is located above the overhead control panel control unit (N70).
4	Unclip the cover (2).
5	Remove inside rearview mirror (1).	Unclip inside rearview mirror (1) diagonally downward from holder.
6	Install in reverse order.
7	Read out and clear fault memory with XENTRY Diagnosis.
			AD00.00-P-2000-04A