Remove/Install Glass Adjustment Drive - AR88.70-P-9060XG
Model 463
as of model year 2019
Fig 1: Glass Adjustment Drive Components Location - Model 463 As Of Model Year 2019 (Shown On Left Side Of Vehicle)
Shown on left side of vehicle
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove mirror glass (1) at left outside mirror (M21/1) and/or right outside mirror (M21/2). | AR88.70-P-9020XG | |
| 2 | Unscrew the bolt (2). | ||
| 3 | Unclip and remove glass adjustment drive (4) until electrical connector (3) can be accessed. | ||
| 4 | Disconnect the electrical connector (3). | ||
| 5 | Install in reverse order. |