Remove/Install Wiper System - AR82.30-P-6400XG
Model 463
as of model year 2019
| Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | AS82.30-Z-0001-01A | |
| Remove/install | |||
| 1 | Remove wiper arms (1) from windshield. | AR82.30-P-6952XG | |
| 2 | Remove covers (2). | ||
| 3 | Unscrew nuts (3). | *BA82.30-P-1011-01B | |
| 4 | Remove spacer disks (4) and seals (5). | Replace seals (5). | |
| 5 | Remove instrument panel. | AR68.10-P-1000XG | |
| 6 | Remove screws (11) on right and left from defroster vent (10). | ||
| 7 | Unclip and remove defroster vent (10) at catch hooks (arrows). | ||
| 8 | Remove screw (13) at left air duct (12). | ||
| 9 | Expose left air duct (12), remove screws (7) and disconnect wiper linkage (6) from crank of wiper motor (M6/1). | *BA82.30-P-1009-01B | |
| 10 | Remove screws (8) from left wiper bearing (6.1). | *BA82.30-P-1010-01B | |
| 11 | Remove screws (9) from right wiper bearing (6.2). | *BA82.30-P-1010-01B | |
| 12 | Remove wiper linkage (6). | ||
| 13 | Install in reverse order. |
WINDSHIELD WIPER
| Number | Designation | Model 461 Model 463 up to model year 2019 | Model 463 as of model year 2019 | |
|---|---|---|---|---|
| BA82.30-P-1009-01B | Screw, wiper linkage to wiper motor (connection) | Nm | - | 9 |
WINDSHIELD WIPER
| Number | Designation | Model 461 Model 463 up to model year 2019 | Model 463 as of model year 2019 | |
|---|---|---|---|---|
| BA82.30-P-1010-01B | Screw/bolt, wiper linkage to firewall | Nm | - | 10 |
WINDSHIELD WIPER
| Number | Designation | Model 461 Model 463 up to model year 2019 | Model 463 as of model year 2019 | |
|---|---|---|---|---|
| BA82.30-P-1011-01B | Nut, flange seal mount to wiper linkage | Nm | - | 8 |