Remove/Install Windshield Wiper Arm - AR82.30-P-6952XG

Model 463 

as of model year 2019 

Fig 1: Windshield Wiper Arm Components Location - Model 463 As Of Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.	When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).	AS82.30-Z-0001-01A
	Remove/install
1	Bring windshield wiper system into parked position.
2	Switch off ignition and store transmitter key outside of transmission range (min. 2 m).
3	Fold up covers (1).
4	Unscrew nuts (2).	Nut, windshield wiper arm to wiper linkage	*BA82.30-P-1012-01B
5	Remove wiper arms (3).	: Position wiper arms (3) at the front passenger side parked position marking (A) or the driver's side parked position markings (B). Thrust washer M 10x1.5	Fig 2
		Puller	Fig 3
6	Install in reverse order.

WINDSHIELD WIPER

Number	Designation		Model 461 Model 463 up to model year 2019	Model 463 as of model year 2019
BA82.30-P-1012-01B	Nut, windshield wiper arm to wiper linkage	Nm	-	30

Fig 2: Identifying Thrust Washer M 10x1.5 (210 589 04 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Puller (001 589 38 33 00)

Courtesy of MERCEDES-BENZ USA