Remove/Install Windshield Washer Nozzle - AR82.35-P-6970XG
Model 463
as of model year 2019
| Remove/install | |||
| 1 | Open engine hood and raise to upright position. | AR88.40-P-1000XG | |
| 2 | Disconnect electrical connectors (1) from spray nozzle heater at left (R2/2) or spray nozzle heater at right (R2/3). | ||
| 3 | Detach the connections of the hose line (2) from the spray nozzles (3). | ||
| 4 | Unclip the spray nozzles (4) from the holders (5). | ||
| 5 | Install in reverse order. | ||
| Check | |||
| 6 | Check and correct setting of spray nozzles. | ||
| AP82.30-P-8252GA |