Remove/Install Vehicle Cell Phone Interface - AR82.70-P-8920GW

Model 463 

as of model year 2013 up to model year 2019 

Fig 1: Vehicle Media/Cell Phone Interface Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Remove SAM control unit	Place SAM control unit to one side with lines still connected	AR54.21-P-1254GW
2	Detach bracket from SAM control unit (N10)	There are 4 nuts in total.
3	Disconnect electrical connectors on media interface control unit (N125/1)
4	Detach media interface control unit (N125/1) from bracket	There are 3 nuts in total.
5	Install in the reverse order
6	Read out and clear the fault memory using Star Diagnosis
			AD00.00-P-2000-04A