Remove/Install The Fluid Level Sensor For The Windshield Washer System - AR82.35-P-6005XG
Model 463
as of model year 2019
Fig 1: Fluid Level Sensor/Switch For The Windshield Washer System Components Location - Model 463 As Of Model Year 2019
| Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. | Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children. | AS82.35-Z-0001-01A | |
| Remove/install | |||
| 1 | Remove left front wheel (1). | AR40.10-P-1102XG | |
| 2 | Remove left front fender liner (2). | AR88.10-P-1300XG | |
| 3 | Disconnect electrical connector (4). | ||
| 4 | Pry windshield washer system washer fluid level switch (S42) out of washer fluid reservoir (3). | Fig 2 | |
| 5 | Install in reverse order. | ||
| Check | |||
| 6 | Check fluid level of windshield washer system, correct if necessary. | ||
| AP82.35-P-8210GA |