Remove/Install Sound System Control Unit - AR82.62-P-7724XG
Model 463
as of model year 2019
with code EU8 (Burmester® surround sound system)
Fig 1: Sound System Control Unit Components Location - Model 463 As Of Model Year 2019 With Code EU8
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on avoiding damage to optical fibers during repair work | AH82.60-P-0001-05AK | ||
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (at least 2 m). | ||
| 2 | Remove left load compartment trim (1). | AR68.30-P-1185XG | |
| 3 | Unscrew nuts (2). | ||
| 4 | Place parking system control unit (N62) to one side with electrical lines connected. | id. | |
| 5 | Disconnect the electrical connector (3). | ||
| 6 | Disconnect electrical connector with fiber-optic cable (4). | ||
| 7 | Unscrew nuts (5). | ||
| 8 | Remove sound system amplifier control unit (N40/3) or Advanced sound system amplifier control unit (N40/7). | ||
| 9 | Install in reverse order. | ||
| Initial startup | |||
| 10 | Perform commissioning of sound system amplifier control unit (N40/3) or Advanced Sound System amplifier control unit (N40/7). | ||
| AD00.00-P-2000-04B |