Remove/Install Rear Axle Level Sensor - AR82.10-P-0005GW
Model 463
as of model year 2013 up to model year 2019
Fig 1: Rear Axle Level Sensor Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019
| Remove/install | |||
| 1 | Lift/jack up vehicle | AR00.60-P-1000G | |
| 2 | Disconnect electrical connector (1) from rear axle headlamp range control level sensor (A51) | ||
| 3 | Unscrew nut (2) of link rod (3) and press out link rod (3) | ||
| 4 | Remove bolts (4) | ||
| 5 | Remove rear axle headlamp range control level sensor (A51) | ||
| 6 | Remove torsion bar linkage (3) from rear axle headlamp range control level sensor (A51) | ||
| 7 | Install in the reverse order | ||
| 8 | Perform calibration with STAR DIAGNOSIS | ||
| 9 | Read out and clear the fault memory using Star Diagnosis | ||
| AD00.00-P-2000-04A |