Remove/Install Global Positioning System (GPS) Antenna - AR82.85-P-0002XG
Model 463
as of model year 2019
Fig 1: Global Positioning System (GPS) Antenna Components Location - Model 463 As Of Model Year 2019
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove left outside mirror (M21/1). | AR88.70-P-9000XG | |
| 2 | Remove trim from left outside mirror (M21/1). | AR88.70-P-9040XG | |
| 3 | Remove mirror glass from left outside mirror (M21/1). | AR88.70-P-9020XG | |
| 4 | At end of electrical wiring harness (4) of left outside mirror (M21/1), identify and expose electrical connector of GPS antenna (A2/23). | ||
| 5 | At plug housing (1), unclip fuse (2) (arrow A). | ||
| 6 | Unlock plug housing (1) (arrow B) and pull off electrical line (arrow C). | ||
| 7 | Remove cover (3) from left outside mirror (M21/1). | ||
| 8 | Pull seal (5) approx. 15 cm over electrical wiring harness (4). | ||
| 9 | Pull electrical wiring harness (4) approx. 15 cm out of opening in left outside mirror (M21/1) (arrow D). | ||
| 10 | Identify electrical line of GPS antenna (A2/23) and pull it completely out of seal (5) and opening. | ||
| 11 | Detach telephone antenna (A2/102) and place to one side with line connected. | Model 463 as of model year 2019 with code E79 (Telephone antenna) |
AR82.62-P-0011XG |
| 12 | Remove screw (4). | ||
| 13 | Unscrew GPS antenna (A2/23) (arrow E) and remove. | ||
| 14 | Install in reverse order. |