Remove/Install Front Axle Level Sensors - AR82.10-P-0004XG

Model 463

as of model year 2019

Fig 1: Front Axle Level Sensors Components Location - Model 463 As Of Model Year 2019

G13669723

Courtesy of MERCEDES-BENZ USA

	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Remove/install
1	Remove left or right front wheel.		AR40.10-P-1102XG
2	Disconnect electrical connector (1).
3	Unscrew nut (2) and unhook linkage (3) at left front level sensor (B22/8) or at right front level sensor (B22/9).	Do not turn left front level sensor (B22/8) or right front level sensor (B22/9). Observe installation position.
4	Unscrew nuts (4) and remove left front level sensor (B22/8) or right front level sensor (B22/9) with holder (5).
5	Remove the bolts (6) from holder (5).	Only when replacing left front level sensor (B22/8) or right front level sensor (B22/9).
6	Remove left front level sensor (B22/8) or right front level sensor (B22/9) from holder (5).	Only when replacing left front level sensor (B22/8) or right front level sensor (B22/9).
7	Install in reverse order.
	Calibrate
8	Calibrate left front level sensor (B22/8) or right front level sensor (B22/9).
		Only when replacing left front level sensor (B22/8) or right front level sensor (B22/9).	AD00.00-P-2000-04B
	Check
9	Check headlamp adjustment, correct if necessary.
		Only when replacing left front level sensor (B22/8) or right front level sensor (B22/9).	AP82.10-P-8260GA