Remove/Install COMAND Display - AR82.85-P-7429GW

Model 463 

as of model year 2013 up to model year 2019 

Fig 1: COMAND Display Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition
2	Unclip covers of bolts (1)
3	Remove bolt (1)
4	Detach optical fiber connector	Cover fiber optic cable	AR82.95-P-0005-01A
	Notes on fiber optic cable	Do not kink or stretch fiber-optic cable. The fiber-optic cable may be damaged. Cover up fiber-optic cable. Fit covers to optical connector and equipment connection: ↓ ↓	AH82.70-P-0001-02A
5	Disconnect electrical connector
6	Remove Audio/COMAND display (A408)
7	Install in the reverse order
8	Read out and clear the fault memory using Star Diagnosis
			AD00.00-P-2000-04A