Remove/Install Ambiance Illumination Control Unit - AR82.20-P-0001XG

Model 463 

as of model year 2019 

Fig 1: Ambiance Illumination Control Unit Components Location - Model 463 As Of Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Carry out commissioning of ambient lighting control unit (N162).	When replacing the ambient lighting control unit (N162).
			AD00.00-P-2000-04B
2	Switch off ignition and store transmitter key outside of transmitter range (at least 2 m).
3	Remove trim (1) on front passenger side under instrument panel.		AR68.10-P-1502XG
4	Disconnect electrical connector (2).
5	Remove nuts (3).
6	Remove ambient lighting control unit (N162).
7	Install in reverse order.