Remove/Install Additional COMAND Fan Motor- AR82.85-P-0005GW

Model 463 

as of model year 2013 up to model year 2019 

Fig 1: COMAND Fan Motor Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove COMAND controller unit		AR82.85-P-1100GW
2	Disconnect electrical connector from COMAND fan motor (M4/13)
3	Remove screw/bolts (2)
4	Push COMAND fan motor (M4/13) downwards and unclip from air duct (2)	Check COMAND fan motor (M4/13) is correctly latched into the air duct (2).
5	Detach COMAND fan motor (M4/13)
6	Install in the reverse order